My dad, Cliff West, took these pictures around March of 2002.
Photo by Cliff West
First, at Union Pacific’s Albina Yard in Portland, Oregon, Union Pacific SD70M #4867 is a 4,000-horsepower SD70M that was assembled by Bombardier Inc. in Sahagun, Mexico, for the General Motors Locomotive Group in January 2002.
Photo by Cliff West
Moving to the Amtrak depot in Vancouver, Washington, Chicago & North Western #8603 is a 4,380-horsepower Dash 9-44CW that was built by General Electric in November 1993. The Chicago & North Western was merged into the Union Pacific on April 24, 1995.
Photo by Cliff West
Burlington Northern Santa Fe #3547 was built by the Electro-Motive Division of General Motors in April 1957 as Great Northern 1,200-horsepower SW1200 #31. After the Great Northern was merged into the Burlington Northern on March 2, 1970, it became Burlington Northern #163 and was classified as an SW12.
Photo by Cliff West
Following the merger of the Burlington Northern and the Atchison, Topeka & Santa Fe on September 22, 1995, this locomotive became Burlington Northern Santa Fe #3547 in July 1998.
Photo by Cliff West
This is a Harsco Track Technologies RGH10C Rail Grinder. It uses independently adjustable grinder heads to restore the profile of the rail and remove irregularities to extend rail life, reduce wear on equipment, and reduce fuel use. Harsco is a company based in Harrisburg, Pennsylvania, with a history that dates back to 1853, when it was founded as the Harrisburg Car Manufacturing Company. It became Harrisburg Steel Corporation in 1935, and in 1956 it became Harsco Corporation with three divisions: Metals & Minerals, Rail, and Industrial. In 1979, Harsco Corporation merged with Fairmont Railway Motors, Inc., founded in 1905 by Frank E. Wade as Fairmont Machine Company, a small machine shop in Fairmont, Minnesota. Fairmont began producing small single cylinder engines in 1907, and was incorporated in 1909 and began to manufacture handcar-like rail vehicles powered by the two-cycle engines. Fairmont Railway Motors became Fairmont Gas Engine and Railway Motor Car Company in 1915, and then became Fairmont Railway Motors, Inc. in 1923. Fairmont acquired Mudge & Company of Chicago, another railway motor car business, in 1928. In 1940, Fairmont developed HY-RAIL® attachments to allow automobile and trucks to be used on rails as well as roads, and in 1955, Fairmont acquired the railcar interests of Fairbanks-Morse. In 1992, Harsco Corporation acquired Tamper Corporation, which was founded in Canada in 1934, creating Fairmont Tamper. In 1999, the Pandrol Jackson Company was merged with Fairmont Tamper to form Harsco Track Technologies. Pandrol Jackson had been formed in 1990, when Pandrol International, which in 1980 had formed a North American rail grinding joint venture with Speno Rail Services, acquired a 75% interest in ultrasonic rail flaw detection company Dapco Industries, as well as a controlling interest in Jackson-Jordan, Inc., which was created when Jackson Vibrators of Ludington, Michigan purchased the O.F. Jordan Company. Corwill Jackson founded the Electric Tamper & Equipment Company in Ludington, Michigan, in 1923, and created the electric vibrating hand tamper. Electric Tamper & Equipment Company was incorporated as Jackson Vibrators in 1937. In 1960, the O.F. Jordan Company was purchased by Jackson Vibrators of Ludington, Michigan, forming the Jackson-Jordan Company. The O.F. Jordan Company was founded by Oswald Falcus Jordan in 1898 to produce Jordan spreaders based on his 1891 patent with Robert Potts in Chicago, Illinois.
Photo by Cliff West
Burlington Northern Santa Fe #1040 is a 4,400-horsepower Dash 9-44CW that was built by General Electric in October 1996.
No comments:
Post a Comment